REAR DOOR COURTESY SWITCH > INSTALLATION |
for Preparation Click here
- HINT:
- Use the same procedures for the RH and LH sides.
- The procedures listed below are for the LH side.
- A bolt without a torque specification is shown in the standard bolt chart (Click here).
1. INSTALL REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY |
Connect the connector.
Install the bolt and switch.
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
3. PERFORM INITIALIZATION |
Perform initialization (Click here).
- NOTICE:
- Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.