FRONT DOOR SPEAKER (for Hatchback) > INSTALLATION



1. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY


    E222075E01
  1. Using an air riveter or hand riveter, install the front No. 1 speaker assembly onto the front door panel with 3 new strike rivets.

    HINT:
    Install the new strike rivets in the order shown in the illustration.

    NOTICE:

    1. B130465
      Do not pry the rivet with the riveter, as this will cause damage to the riveter and mandrel.

    2. B130466
      Confirm that the rivets are seated properly against the speaker.
    3. Do not tilt the riveter when installing the rivet onto the speaker.
    4. Do not leave any space between the rivet head and speaker.

    5. B130467
      Do not leave any space between the speaker and door. Firmly hold the 2 items together while installing the rivet.
  1. Connect the connector.



2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY (for 5 Door)


    B271597E01
  1. Connect the front door lock remote control cable and the front door inside locking cable to the front door inside handle.

    Text in Illustration 
    *1
    Front Door Lock Remote Control Cable Assembly
    *2
    Front Door Inside Locking Cable Assembly


    B271596
  1. Engage the 7 clips and the front door trim board.



    B271595
  1. Install the 3 screws.



    B275407
  1. Engage the claw and close the cover.



3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY (for 3 Door)


    B271597E01
  1. Connect the front door lock remote control cable and the front door inside locking cable to the front door inside handle.

    Text in Illustration 
    *1
    Front Door Lock Remote Control Cable Assembly
    *2
    Front Door Inside Locking Cable Assembly


    B284585
  1. Engage the 8 clips and the front door trim board.



    B271595
  1. Install the 3 screws.



    B275407
  1. Engage the claw and close the cover.



4. INSTALL FRONT ARMREST BASE PANEL UPPER (w/ Power Window)
  1. Connect the connector.



    B284582
  1. Engage the 9 claws and 4 guides, and install the front armrest base upper panel.



5. INSTALL FRONT ARMREST BASE PANEL UPPER (w/o Power Window)
  1. Connect the connector.

    HINT:
    If the armrest base upper panel is equipped with door lock switch, connect the connector.


    B284583
  1. Engage the 6 claws and 3 guides, and install the front armrest base upper panel.



6. INSTALL FRONT DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window)


    B271669E01
  1. Install the window regulator handle plate.

    Text in Illustration 
    *a
    Inside of Vehicle
  1. Open all the windows.



    B284599E01
  1. Install the front door window regulator handle with clip at the angle shown in the illustration.

    Text in Illustration 
    *a
    Assemble with Glass in Fully Open Position