FRONT PASSENGER SEAT BELT WARNING LIGHT (for Sedan) > INSTALLATION



1. INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY (Built in Front Passenger Seat Belt Warning Light)


    B138529

  1. Engage the 3 claws and install the hazard warning signal switch.



2. INSTALL INSTRUMENT PANEL CENTER REGISTER ASSEMBLY


    E127121

  1. Engage the 8 claws and the instrument panel center register.



3. INSTALL RADIO RECEIVER ASSEMBLY (for Integrated with Panel)


    B138582

  1. for Integrated with Panel:

    1. Connect the plug.

    2. Connect the 3 radio connectors.



      3. B138581

    3. Align the 2 bosses of the instrument panel with the hole in the radio bracket.

    4. Engage the 4 clips and 4 claws and install the radio receiver.



      5. B138579

    5. Tighten the 4 bolts.

    6. Connect the hazard warning signal switch connector.



    B138304

  1. except Integrated with Panel:

    1. Connect the plug.

    2. Connect the 2 radio connectors.



      3. B138576

    3. Align the 2 bosses of the instrument panel with the hole in the radio bracket.

    4. Install the radio receiver with the 4 bolts.



4. INSTALL INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY (except Integrated with Panel)


B132395

  1. Engage the 2 claws and 4 clips and install the instrument cluster finish panel center.



5. INSTALL INSTRUMENT CLUSTER FINISH PANEL NO.1


E116833

  1. Fit the 2 claws of the instrument cluster finish panel into the upper instrument cluster finish panel center.



    E116834

  1. Engage the 5 claws and 5 clips and install the instrument cluster finish panel.



6. INSTALL INSTRUMENT PANEL FINISH PANEL END RH


B132318

  1. Engage the 6 claws and 3 clips and install the instrument panel finish panel end RH.



7. INSTALL INSTRUMENT PANEL FINISH PANEL END LH


B132317

  1. Engage the 6 claws and 3 clips and install the instrument panel finish panel end LH.



8. INSTALL INSTRUMENT PANEL LOWER CENTER FINISH PANEL


B132316

  1. Engage the 2 claws and 2 clips and install the instrument panel finish panel lower center.



9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }