OUTER REAR VIEW MIRROR (for Sedan) > REMOVAL


HINT:
  1. Use the same procedure for both the RH and LH sides.
  2. The procedure described below is for the LH side.


1. REMOVE CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE FRONT DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window)


B136189

  1. Insert a clip remover between the plate and door trim.

  1. Turn the handle with the clip remover inserted, as shown in the illustration.

  1. Remove the front door window regulator handle and clip.

  1. Remove the window regulator handle plate.



3. REMOVE FRONT ARMREST BASE UPPER PANEL


B136158

  1. for Driver side with power window:

    1. Remove the screw.

    2. Disengage the 7 claws and 2 clips and remove the front armrest base upper panel.

    3. Disconnect the connector.



    B141925

  1. for Front passenger side with power window:

    1. Remove the screw.

    2. Disengage the 7 claws and 2 clips and remove the front armrest base upper panel.

    3. Disconnect the connector.



    B141926

  1. w/o Power window:

    1. Remove the screw.

    2. Disengage the 5 claws and 2 clips and remove the front armrest base upper panel.



4. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH


B136157E01

  1. Disengage the claw and clip and remove the front door lower frame bracket garnish.



5. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY


    B136159

  1. w/ Power window:

    1. Remove the screw.



      2. B136160

    2. Disengage the 9 clips.



      3. B136161

    3. Disconnect the front door lock remote control cable and front door inside locking cable and remove the front door trim board.



    B136193

  1. w/o Power window:

    1. Remove the screw.



      2. B136192

    2. Disengage the 9 clips.



      3. B136194

    3. Disconnect the front door lock remote control cable and front door inside locking cable and remove the front door trim board.



6. REMOVE OUTER REAR VIEW MIRROR


B136162E01

  1. w/ Power mirror:
    Disconnect the connector.

  1. Remove the 3 nuts, disengage the claw and remove the outer rear view mirror.



7. REMOVE OUTER REAR VIEW MIRROR GLASS


B136241E02
Text in Illustration 
*1
Moulding Remover
*2
Protective Tape

  1. Apply protective tape to the lower part of the mirror body.

  1. Press down the upper part of the mirror and tilt the mirror.

  1. Insert a moulding remover into the 2 clip installation positions on the lower part of the mirror to disengage the 2 clips.

  1. Remove the outer rear view mirror glass by pulling it downward.



8. REMOVE OUTER MIRROR COVER


    B136242

  1. Disengage the 4 claws from the inside of the mirror body.

  1. Push the upper part of the mirror cover forward to tilt it, and then disengage the claw on the lower part to remove the outer mirror cover.