REAR SEAT ASSEMBLY (for Hatchback 60/40 Split Seat Type LH Side) > REASSEMBLY

for Preparation Click here

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

1. Using hog ring pliers, install the separate type rear seatback cover to the separate type rear seatback pad with 6 new hog rings.
   

   Text in Illustration 

   *1	New Hog Ring
   *2	Hog Ring Pliers

   NOTICE:

   1. Do not soil or scratch the separate type rear seatback cover.
      
   2. When installing hog rings, minimize wrinkles as much as possible.
      

1. Install the rear seatback lock assembly LH with the 2 bolts.
   

   Torque:

   32 N*m{ 326 kgf*cm , 24 ft.*lbf }

1. Temporary install the rear seatback frame sub-assembly LH.
   

2. Engage the 5 hooks.
   

3. Engage the 8 clips to install the rear seatback frame sub-assembly.
   

1. Align the protruding portion of the rear seat headrest support with the installation groove of the rear seat adjuster frame.
   

   Text in Illustration 

   *a	Protruding

2. Engage the 8 claws to install the 4 rear seat headrest support.
   

1. Engage the 2 claws to install the rear seatback stop button grommet.
   

1. Turn the rear seatback lock release button in the direction indicated by arrow to install it.
   

HINT:

Use the same procedure for both sides.

1. Engage the 4 claws to install the rear seatback cover.
   

1. Install the rear seat headrest assembly.
   

1. Install the rear seat center headrest assembly.
   

1. Using hog ring pliers, install the bench type rear seat cushion cover to the bench type rear seat cushion pad with 44 new hog rings.
   

   Text in Illustration 

   *1	New Hog Ring
   *2	Hog Ring Pliers

   NOTICE:

   1. Do not soil or scratch the bench type rear seat cushion cover.
      
   2. When installing hog rings, minimize wrinkles as much as possible.