DTC U0129 Lost Communication with Skid Control ECU |
DESCRIPTION
The combination meter assembly receives signals from the skid control ECU through the CAN communication system.DTC No. | DTC Detecting Conditions | Trouble Areas |
U0129 | When either of following conditions detected:
|
|
WIRING DIAGRAM
INSPECTION PROCEDURE
1.CONFIRM DTC OUTPUT |
Connect the Techstream to the DLC3.
Turn the ignition switch ON and turn the tester ON.
Clear the stored DTCs by selecting the following menu items on the tester: Body Electrical / Combination Meter / Trouble Codes.
Start the engine and wait for at least 60 seconds.
Check for DTCs.
- Result:
Result Proceed to DTC output A DTC not output B
|
| ||||
A | ||
|