PARKING BRAKE CABLE (for Hatchback Disc Type) > REMOVAL



1. REMOVE REAR CONSOLE BOX ASSEMBLY
(Click here)


2. LOOSEN PARKING BRAKE CABLE


C234723E03

  1. Loosen the equalizer and lock nut.

    Text in Illustration 
    *1
    		Parking Brake Equalizer
    *2
    		Lock Nut

    NOTICE:
    Do not reuse the loosened nut.


3. REMOVE REAR WHEEL


4. REMOVE FRONT NO. 4 FLOOR HEAT INSULATOR


    A259859

  1. Remove the 2 nuts and the front No. 4 floor heat insulator.



5. REMOVE FUEL TANK COVER VENT CASE SUB-ASSEMBLY


    A259860

  1. Pinch and remove the clip as shown in the illustration.

  1. Remove the bolt and the fuel tank cover vent case sub-assembly.



6. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY


    C235481E01

  1. Separate the parking brake cable from the parking brake equalizer

    Text in Illustration 
    *1
    		Parking Brake Equalizer
    *2
    		No. 2 parking brake cable assembly
    *3
    		No. 3 parking brake cable assembly


  1. Remove cable clamp A from the body.


    C235067E01

  1. Remove the 5 bolts.

  1. Remove cable clamp B from the rear axle beam.



    C235479

  1. Separate the No. 3 parking brake cable assembly from the rear disc brake operation lever.



    C235480E01

  1. Insert an offset wrench 14 mm at the base of the parking brake cable as shown in the illustration to disengage the clip. Pull out the No. 3 parking brake cable assembly from the rear disc brake cylinder.

    Text in Illustration 
    *1
    		No. 3 Parking Brake Cable Assembly
    *2
    		Clip
    *3
    		Offset Wrench 14 mm


7. REMOVE NO. 2 PARKING BRAKE CABLE ASSEMBLY

HINT:
Use the same procedure for the RH side as for the LH side.