CLUTCH RELEASE CYLINDER (for Sedan) > INSTALLATION |
1. INSTALL CLUTCH RELEASE CYLINDER ASSEMBLY |
Install the clutch release cylinder with the 2 bolts.
- Torque:
- 12 N*m{ 120 kgf*cm , 8.7 ft.*lbf }
2. CONNECT CLUTCH RELEASE CYLINDER TO FLEXIBLE HOSE TUBE |
Using a union nut wrench, connect the flexible hose tube.
- Torque:
- 15 N*m{ 155 kgf*cm , 11 ft.*lbf }
- NOTICE:
- Use the formula to calculate special torque values for situations where the union nut wrench is combined with a torque wrench (Click here).
3. BLEED CLUTCH PIPE LINE |
Fill the brake reservoir tank with brake fluid and bleed the clutch system.
- Torque:
- 8.3 N*m{ 85 kgf*cm , 73 in.*lbf }
4. INSPECT FOR CLUTCH FLUID LEAK |