FRONT SHOCK ABSORBER (for Hatchback) > DISPOSAL



1. DISPOSE OF FRONT SHOCK ABSORBER


    C110330E01
  1. Fully extend the front shock absorber piston rod, and fix it at an angle in a vise or similar tool.

  1. Using a drill or similar tool, slowly make a hole in the area (A-B) shown in the illustration to discharge the gas inside.

    NOTICE:
    1. The gas is colorless, odorless and harmless.
    2. Since the discharging gas may cause chips to scatter, cover the drill with a piece of cloth when making the hole.