FUEL PRESSURE REGULATOR (for Hatchback) > INSTALLATION



1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY


A119159

  1. Apply gasoline to 2 new O-rings and then install them onto the fuel pressure regulator assembly.



    A167625

  1. Install the fuel pressure regulator assembly.



2. INSTALL FUEL PUMP
(Click here)


3. INSTALL FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE
(Click here)


4. INSPECT FOR FUEL LEAK

  1. Check fuel pump operation.

    1. Connect the Techstream to the DLC3.

    2. Turn the ignition switch to ON and turn the Techstream main switch on.

      NOTICE:
      Do not start the engine.

    3. Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the Fuel Pump /Speed.

    4. Check for pressure in the fuel inlet tube from the fuel line. Check that sounds of fuel flowing from the fuel tank can be heard. If no sounds can be heard, check the integration relay, fuel pump, ECM and wiring connectors.

  1. Inspect for fuel leaks.

    1. Check for fuel leaks from the fuel system after doing any maintenance or repairs. If there is a fuel leak, repair or replace parts if necessary.

  1. Turn the ignition switch off.

  1. Disconnect the Techstream from the DLC3.