4WD CONTROL ECU > REMOVAL |
for Preparation Click here
1. REMOVE FRONT DOOR SCUFF PLATE RH (for Regular Cab) |
Remove the front door scuff plate RH (Click here).
- HINT:
- Use the same procedures described for the LH side.
2. REMOVE FRONT DOOR SCUFF PLATE RH (for Double Cab, for CrewMax) |
Remove the front door scuff plate RH (Click here).
- HINT:
- Use the same procedures described for the LH side.
3. REMOVE COWL SIDE TRIM BOARD RH |
Remove the cowl side trim board RH (Click here).
- HINT:
- Use the same procedures described for the LH side.
4. REMOVE INSTRUMENT SIDE PANEL RH |
Using a moulding remover, detach the 6 claws and remove the side panel.
5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH |
Remove the bolt.
Remove the 3 screws.
Detach the 3 claws and remove the finish panel.
Disconnect the connector.
6. REMOVE 4WD CONTROL ECU |
Disconnect the 2 ECU connectors.
Remove the bolt and ECU.