4WD CONTROL ECU > INSTALLATION

for Preparation Click here



1. INSTALL 4WD CONTROL ECU


    C160016

  1. Install the ECU with the bolt.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. Connect the 2 ECU connectors.



2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH


    B230430

  1. Connect the connector.



    B226741

  1. Attach the 3 claws to install the finish panel.

  1. Install the 3 screws.

  1. Install the bolt.



3. INSTALL INSTRUMENT SIDE PANEL RH


    B229198

  1. Attach the 6 claws to install the side panel.



4. INSTALL COWL SIDE TRIM BOARD RH

  1. Install the cowl side trim board RH (Click here).

    HINT:
    Use the same procedures described for the LH side.


5. INSTALL FRONT DOOR SCUFF PLATE RH (for Regular Cab)

  1. Install the front door scuff plate RH (Click here).

    HINT:
    Use the same procedures described for the LH side.


6. INSTALL FRONT DOOR SCUFF PLATE RH (for Double Cab, for CrewMax)

  1. Install the front door scuff plate RH (Click here).

    HINT:
    Use the same procedures described for the LH side.