FRONT WIPER MOTOR > REMOVAL |
for Preparation Click here
1. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH |
Remove the nut, wiper arm and blade.
2. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH |
Remove the nut, wiper arm and blade.
3. REMOVE HOOD TO COWL TOP SEAL |
Using a clip remover, detach the 16 claws and remove the cowl top seal.
4. REMOVE FRONT FENDER TO COWL SIDE SEAL LH |
Using a clip remover, detach the claw and remove the cowl side seal.
5. REMOVE FRONT FENDER TO COWL SIDE SEAL RH |
- HINT:
- Use the same procedures described for the LH side.
6. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY |
Remove the 2 clips.
Detach the 8 claws and remove the ventilator louver.
7. REMOVE FRONT WIPER MOTOR AND LINK ASSEMBLY |
Disconnect the connector.
Remove the nut.
Remove the 4 bolts and wiper motor and link assembly.
8. REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY |
Using a screwdriver, disconnect the rod of the wiper link from the wiper motor as shown in the illustration.
- HINT:
- Tape the screwdriver tip before use.
Remove the 3 bolts.
Rotate the crank arm clockwise and remove the wiper motor.