FRONT PASSENGER AIRBAG ASSEMBLY > INSTALLATION |
for Preparation Click here
1. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY |
Attach the 5 hooks (A).
Attach the 5 hooks (B) and install the front passenger airbag on the instrument panel.
Install the 2 screws.
Connect the 2 connectors and install the instrument panel wire to the front passenger airbag.
- NOTICE:
- When handling the airbag connector, take care not to damage the airbag wire harness.
2. INSTALL SIDE NO. 2 DEFROSTER NOZZLE DUCT |
Attach the claw to install the duct.
Install the 2 screws.
3. INSTALL NO. 1 HEATER TO REGISTER DUCT WITH NO. 2 HEATER TO REGISTER DUCT |
Install the duct with the 5 screws.
4. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY |
Install the register with the 3 screws.
5. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY |
- HINT:
- Refer to the procedures from "INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY" (for Column Shift Type) (Click here).
- Refer to the procedures from "INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY" (for Floor Shift Type) (Click here).
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
7. CHECK SRS WARNING LIGHT |
Check the SRS warning light (Click here).