POWER SEAT SWITCH (w/o Seat Position Memory System) > INSTALLATION |
for Preparation Click here
- HINT:
- Use the same procedures for the LH side and RH side.
- The procedures listed below are for the LH side.
1. INSTALL FRONT POWER SEAT SWITCH LH |
Install the switch with the 3 screws.
Connect the switch connector.
2. INSTALL LEG SUPPORT ADJUSTMENT SWITCH (w/ Leg Support Adjustment Switch) |
Connect the switch connector.
Install the switch with the 2 screws.
Attach the 2 wire harness clamps.
3. INSTALL FRONT SEAT CUSHION SHIELD LH |
Connect the switch connectors.
Attach the 2 claws to install the cushion shield.
Install the 3 screws.
Install the 2 screws.
Using hog ring pliers, install the rubber band of the seatback cover to the seat frame with new hog rings.
4. INSTALL RECLINING POWER SEAT SWITCH KNOB LH |
Attach the 2 claws to install the knob.
5. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB LH |
Attach the 2 claws to install the knob.
6. INSTALL FRONT SEAT ASSEMBLY LH |
Install the front seat (Click here).