LIGHTING SYSTEM > CUSTOMIZE PARAMETERS |
for Preparation Click here
CUSTOMIZING FUNCTION WITH TECHSTREAM |
- HINT:
- The following items can be customized.
- NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
Connect the Techstream to the DLC3.
Turn the ignition switch ON.
Turn the Techstream on.
Enter the following menus: Customize Setting.
Select the setting by referring to the table below.
Main Body Display Default Contents Setting I/L ON / ACC OFF ON Illuminates light when ignition switch turned to ACC
(Room light illuminated when interior light switch set to DOOR)ON / OFF Lighting Time 15s Changes illumination duration after door closure
(It will quickly fade out when turning ignition switch ON)7.5s / 15s / 30s I/L ON / Unlock ON Function to light up room light when unlocking with door key cylinder
(Room light illuminated when interior light switch set to DOOR)ON / OFF Light OFF Delay 30s Function to continue illuminating headlight for certain period of time after closing all doors with ignition switch turned from ON to OFF under condition that light control switch is at HEAD or AUTO with the headlight ON OFF / 30s / 60s / 90s Sensitivity NORMAL Function to adjust ambient light sensitivity of automatic light control system*1 LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2 Disp Ex ON Sen NORMAL Function to change level of ambient light at which system dims lights such as combination meter indicator light, A/C indicator light and clock light*2 LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2 Disp Ex OFF Sen NORMAL Function to change level of ambient light at which system cancels dimming of lights such as combination meter indicator light, A/C indicator light and clock light*3 LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2 - HINT:
- The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.
*1 System Setting Setting DARK2 DARK1 NORMAL LIGHT1 LIGHT2 - HINT:
- When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.
*2 System Setting Setting DARK2 DARK1 NORMAL LIGHT1 LIGHT2 - HINT:
- When the setting is closer to the "Light" side, the system dims the indicator lights even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before dimming the indicator lights.
*3 System Setting Setting DARK2 DARK1 NORMAL LIGHT1 LIGHT2 - HINT:
- When the setting is closer to the "Dark" side, the system cancels the dimming of the indicator lights even when the surrounding area is relatively dark. When the setting is closer to the "Light" side, the system waits until the surrounding area is brighter before canceling the dimming of the indicator lights.