AIR PUMP > INSTALLATION

for Preparation Click here

1. Set the air pump assembly in place so that the bracket tab on the air pump bracket fits into the slot on the vehicle and the stud on the vehicle fits into the slot on the air pump bracket (View A).
   

   Text in Illustration 

   *1	View A
   *2	View B
   *3	Stud
   *4	Bracket Tab

2. Insert the bracket tab into the slot (View B).
   

3. Install the 2 bolts and 2 nuts.
   

   Torque:

   for bolt:

   18 N*m{ 184 kgf*cm , 13 ft.*lbf }

   for nut:

   12 N*m{ 122 kgf*cm , 9 ft.*lbf }

1. Install the No. 2 air injection system hose as shown in the illustration.
   
   

   
   
   
   
   

   Text in Illustration 

   *1	Air Injection Hose	*2	Wire Harness
   *3	White Paint Mark	-	-

2. Attach the clamp.
   

3. Connect the air injection system hose to the air tube assembly shown in the illustration.
   

   Text in Illustration 

   *1	Protrusion
   *2	Paint Mark
   *a	Upper

   HINT:

   1. Make sure the paint mark of the air injection system hose is facing upward.
      
   2. Make sure the direction of the hose clamp is as shown in the illustration.
      

4. Attach the air pump connector clamp.
   

5. Connect the air pump connectors.
   

6. Install the fender apron seal with the 2 clips.
   

1. Install the fender liner with the 9 clips.