VANE PUMP (for 1UR-FE) > DISASSEMBLY |
for Preparation Click here
1. FIX VANE PUMP ASSEMBLY |
Using SST, hold the vane pump in a vise.
- SST
- 09630-00014
(09631-00132)
2. REMOVE POWER STEERING SUCTION PORT UNION |
Remove the bolt and suction port union from the vane pump.
Using a screwdriver, remove the O-ring from the suction port union.
3. REMOVE VANE PUMP REAR HOUSING |
Remove the 4 bolts and rear housing from the front housing.
Using a screwdriver, remove the O-ring from the rear housing.
- HINT:
- Tape the screwdriver tip before use.
4. REMOVE VANE PUMP SHAFT SUB-ASSEMBLY WITH PULLEY |
Using 2 screwdrivers, remove the snap ring from the vane pump shaft.
Remove the vane pump shaft sub-assembly with pulley.
- NOTICE:
- Be careful not to drop or damage the vane pump shaft sub-assembly with pulley. If it is damaged, replace the vane pump assembly.
5. REMOVE VANE PUMP ROTOR |
Remove the 10 vane plates.
- NOTICE:
- Take care not to drop the vane plate.
Remove the vane pump rotor.
6. REMOVE VANE PUMP CAM RING |
Remove the cam ring from the front housing.
7. REMOVE VANE PUMP FRONT SIDE PLATE |
Remove the front side plate from the front housing.
Using a screwdriver, remove the O-ring from the front side plate.
- HINT:
- Tape the screwdriver tip before use.
Remove the O-ring from the front housing.
8. REMOVE VANE PUMP HOUSING OIL SEAL |
Using a screwdriver and piece of cloth, pry out the oil seal.
- NOTICE:
- Be careful not to damage the front housing.