DTC    B15E1    Media Malfunction

for Preparation Click here


DESCRIPTION

This DTC is output when signals from disc in the navigation receiver assembly cannot be read.

DTC Code
DTC Detection Condition
Trouble Area
B15E1
When one of the conditions below is met:
  1. An unsuitable disc is inserted.
  2. The disc cannot be read.
  3. The disc cannot be read because of dirt or scratches.
  4. The disc cannot be read because it is inserted upside down.
  1. Disc
  2. Navigation receiver assembly

INSPECTION PROCEDURE

1.CHECK DISC


    I100152

  1. Check that the disc is not deformed or cracked.

    OK:
    No deformation or cracks on the disc.


NG
CHANGE DISC
OK


2.DISC CLEANING


    I100151

  1. Disc cleaning

    1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

      NOTICE:
      Do not use a conventional record cleaner or antistatic preservative.

NEXT


3.REPLACE DISC WITH ANOTHER AND RECHECK

  1. Replace the disc with another and recheck.

  1. Clear the DTC (Click here).

  1. Recheck for DTC and check if the same trouble occurs again.

    OK:
    No DTC is output.


NG
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
OK

END