Tacoma

Toyota Tacoma 2015-2018 Clutch Workshop Manual

(b) Perform a visual inspection of the clutch cover assembly.
Text in Illustration
*a Hair cracks, scratches or discoloration
*b Hair cracks, discoloration or excessive wear
(1) Inspect for hair cracks or scratches extending from the
center outwards, or discoloration.
(2) Inspect for hair cracks in a circular pattern, discoloration or
excessive wear.
If there is any damage, replace the clutch cover assembly.
3. INSPECT FLYWHEEL SUB-ASSEMBLY
(a) Using a dial indicator, check the flywheel sub-assembly runout.
Maximum runout:
0.1 mm (0.00393 in.)
If the runout is more than the maximum, replace the flywheel
sub-assembly.
(b) Perform a visual inspection of the flywheel sub-assembly.
Text in Illustration
*a Hair cracks, scratches or discoloration
*b Hair cracks, discoloration or excessive wear
(1) Inspect for hair cracks or scratches extending from the
center outwards, or discoloration.
(2) Inspect for hair cracks in a circular pattern, discoloration or
excessive wear.
If there is any damage, replace the flywheel sub-assembly.
4. INSPECT CLUTCH RELEASE BEARING ASSEMBLY
(a) Check that the clutch release bearing assembly moves smoothly
without abnormal resistance by turning the sliding parts of the
clutch release bearing assembly (contact surfaces with the clutch
cover assembly) while applying force in the axial direction.
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *