Tacoma

Toyota Tacoma 2015-2018 Clutch Workshop Manual

Last Modified: 11-13-2015 6.6 G Doc ID: RM0000017E100YX
Model Year Start: 2016 Model: Tacoma Prod Date Range: [08/2015 - ]
Title: CLUTCH: CLUTCH UNIT (for RC62F): INSPECTION; 2016 MY Tacoma [08/2015 - ]
INSPECTION
1. INSPECT CLUTCH DISC ASSEMBLY
NOTICE:
When replacing the clutch disc assembly, make sure to perform an inspection of the flywheel sub-assembly
and clutch cover assembly.
(a) Using a vernier caliper, measure the rivet depth
.
Minimum rivet depth:
0.3 mm (0.0118 in.)
If the depth is less than the minimum, replace the clutch disc
assembly.
(b) Using a dial indicator, measure the clutch disc assembly runout.
Maximum runout:
0.7 mm (0.0276 in.)
If the runout is more than the maximum, replace the clutch disc
assembly.
2. INSPECT CLUTCH COVER ASSEMBLY
(a) Using a vernier caliper, measure the depth and width of the
diaphragm spring wear.
Text in Illustration
*a Width
*b Depth
Maximum Wear:
DEPTH WIDTH
0.35 mm (0.0138 in.) 5.0 mm (0.197 in.)
If the depth or width is more than the maximum, replace the
clutch cover assembly.
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *