Tacoma

Toyota Tacoma 2015-2018 Clutch Workshop Manual

SST: 09301-00110
Torque:
19 N·m {195 kgf·cm, 14ft·lbf}
HINT:
Move SST up and down, and right and left lightly after checking that the clutch disc assembly is in the
center, and then tighten the bolts.
3. INSPECT AND ADJUST CLUTCH COVER ASSEMBLY
(a) Using a dial indicator with a roller instrument, measure the
diaphragm spring tip alignment.
SST: 09333-00013
Maximum non-alignment:
0.5 mm (0.0196 in.)
If the alignment is more than the maximum, use SST to
adjust the diaphragm spring tip alignment.
4. INSTALL RELEASE FORK SUPPORT
(a) Install the release fork support to the manual transmission assembly.
Torque:
47 N·m {479 kgf·cm, 35ft·lbf}
5. INSTALL CLUTCH RELEASE BEARING ASSEMBLY
(a) Apply release hub grease to the clutch release fork sub-assembly.
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *