Tacoma

Toyota Tacoma 2015-2018 Clutch Workshop Manual

Last Modified: 11-13-2015 6.6 G Doc ID: RM0000048BA011X
Model Year Start: 2016 Model: Tacoma Prod Date Range: [08/2015 - ]
Title: CLUTCH: CLUTCH UNIT (for R156F): INSPECTION; 2016 MY Tacoma [08/2015 - ]
INSPECTION
1. INSPECT CLUTCH DISC ASSEMBLY
(a) Using a vernier caliper, measure the rivet head depth.
Minimum rivet head depth:
0.3 mm (0.0118 in.)
If the depth is less than the minimum, replace the clutch disc
assembly.
(b) Using a dial indicator, check the disc runout.
Maximum runout:
0.8 mm (0.0315 in.)
NOTICE:
Be sure to measure on the correct side of the clutch disc
assembly.
If the runout is more than the maximum, replace the clutch disc
assembly.
2. INSPECT CLUTCH COVER ASSEMBLY
(a) Using a vernier caliper, measure the depth and width of the
worn areas of the diaphragm spring.
Text in Illustration
*a Width
*b Depth
Maximum Wear:
ITEM SPECIFIED CONDITION
Width 6.0 mm (0.236 in.)
Depth 0.35 mm (0.0138 in.)
If the depth or width is more than the maximum, replace the
clutch cover assembly.
3. INSPECT FLYWHEEL SUB-ASSEMBLY
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *