Tacoma

Toyota Tacoma 2015-2018 Clutch Workshop Manual

Last Modified: 11-13-2015 6.6 G Doc ID: RM000001FZW00KX
Model Year Start: 2016 Model: Tacoma Prod Date Range: [08/2015 - ]
Title: CLUTCH: CLUTCH START CANCEL SWITCH: INSPECTION; 2016 MY Tacoma [08/2015 - ]
INSPECTION
1. INSPECT CLUTCH START CANCEL SWITCH ASSEMBLY
(a) Using an ohmmeter, check that there is resistance between
terminals 2 and 4.
Standard:
10 kΩ or higher
If the result is not as specified, replace the clutch start cancel
switch.
(b) Connect the positive (+) lead from the battery to terminal 3 and
connect negative (-) lead to terminal 1.
(c) Using an ohmmeter, check that there is resistance between terminals 2 and 4.
Standard:
10 kΩ or higher
If the result is not as specified, replace the clutch start cancel switch.
(d) Check that the indicator light comes on and there is resistance
between terminals 2 and 4 when the switch is pressed.
Standard:
Below 1 Ω
If the result is not as specified, replace the clutch start cancel
switch.
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *