Tacoma

Toyota Tacoma 2015-2018 Clutch Workshop Manual

Last Modified: 11-13-2015 6.6 A Doc ID: RM0000032RA012X
Model Year Start: 2016 Model: Tacoma Prod Date Range: [08/2015 - ]
Title: CLUTCH: CLUTCH RELEASE CYLINDER (for RC62F): INSTALLATION; 2016 MY Tacoma [08/2015 - ]
INSTALLATION
1. INSTALL CLUTCH RELEASE CYLINDER ASSEMBLY
(a) Install the clutch release cylinder assembly to the manual transmission assembly with the 2 bolts.
Torque:
12 N·m {120 kgf·cm, 9ft·lbf}
2. INSTALL CLUTCH RELEASE CYLINDER TO ACCUMULATOR TUBE
(a) Using a union nut wrench, install the clutch release cylinder to accumulator tube to the clutch release
cylinder assembly and clutch accumulator assembly.
Torque:
Specified tightening torque -
15 N·m {155 kgf·cm, 11ft·lbf}
HINT:
C
alculate the torque wrench reading when changing the fulcrum length of the torque wrench
.
When using a union nut wrench (fulcrum length of 22 mm (0.866 in.)) + torque wrench (fulcrum length of
162 mm (6.38 in.)): 13 N*m (136 kgf*cm, 10 ft.*lbf)
3. INSTALL RELEASE CYLINDER HEAT INSULATOR
(a) Install the release cylinder heat insulator to the manual transmission assembly with the 4 bolts.
Torque:
12 N·m {120 kgf·cm, 9ft·lbf}
4. INSTALL FRONT PROPELLER SHAFT ASSEMBLY
5. FILL RESERVOIR WITH BRAKE FLUID
6. BLEED CLUTCH LINE
7. CHECK FLUID LEVEL IN RESERVOIR
8. INSPECT FOR CLUTCH FLUID LEAK
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *