Tacoma

Toyota Tacoma 2015-2018 Clutch Workshop Manual

Last Modified: 11-13-2015 6.6 A Doc ID: RM0000032RA011X
Model Year Start: 2016 Model: Tacoma Prod Date Range: [08/2015 - ]
Title: CLUTCH: CLUTCH RELEASE CYLINDER (for R156F): INSTALLATION; 2016 MY Tacoma [08/2015 - ]
INSTALLATION
1. INSTALL CLUTCH RELEASE CYLINDER ASSEMBLY
(a) Install the clutch release cylinder assembly to the manual transmission assembly with the 2 bolts.
Torque:
12 N·m {120 kgf·cm, 9ft·lbf}
2. CONNECT CLUTCH RELEASE CYLINDER TO FLEXIBLE HOSE TUBE
(a) Using a union nut wrench, connect the clutch release cylinder to flexible hose tube to the clutch release
cylinder assembly.
Torque:
Specified tightening torque -
15 N·m {155 kgf·cm, 11ft·lbf}
HINT:
C
alculate the torque wrench reading when changing the fulcrum length of the torque wrench
.
When using a union nut wrench (fulcrum length of 22 mm (0.866 in.)) + torque wrench (fulcrum length of
162 mm (6.38 in.)): 13 N*m (136 kgf*cm, 10 ft.*lbf)
3. INSTALL FRONT PROPELLER SHAFT ASSEMBLY
4. FILL RESERVOIR WITH BRAKE FLUID
5. BLEED CLUTCH LINE
6. CHECK FLUID LEVEL IN RESERVOIR
7. INSPECT FOR CLUTCH FLUID LEAK
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *