Tacoma

Toyota Tacoma 2015-2018 Clutch Workshop Manual

Text in Illustration
MP grease
(b) Install the clutch pedal spring holder.
6. INSTALL CLUTCH PEDAL SUB-ASSEMBLY
(a) Install the clutch pedal sub-assembly to the clutch pedal support with the bolt and nut.
Torque:
34 N·m {350 kgf·cm, 25ft·lbf}
HINT:
Install the bolt from the left side of the vehicle.
7. INSTALL TURN OVER SPRING SEAT COMPRESSION SPRING
(a) Apply MP grease to the contact surfaces of the clutch pedal sub-assembly and the compression spring.
Text in Illustration
MP grease
(b) Install the compression spring to the clutch pedal sub-assembly and the clutch pedal spring holder.
8. INSTALL CLUTCH MASTER CYLINDER ASSEMBLY
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *