Tacoma

Toyota Tacoma 2015-2018 CAN Workshop Manual

DTC DETECTION
ITEM
DTC DETECTION
CONDITION
DTC DETECTION
PRE-CONDITION
DTC CHECK
PROCEDURE
WARNING
INDICATION
IN METER
DTC
STORAGE
METHOD
RH for 10.6
seconds or more.
switch
on.
The
ignition
switch is
ON for 1
second
or more.
The
power
source
voltage
of the
blind
spot
monitor
sensor
LH is 10
V or
more.
blind spot
monitor main
switch (ON/OFF
switch), wait at
least 11.6
seconds.
U1331*
Software
Incompatibility
with Body
Control Module
"B"
Destination
information of the
main body ECU
(multiplex
network body
ECU) and blind
spot monitor
sensor LH do not
match.
All conditions are
met:
Blind
spot
monitor
main
switch
on.
The
ignition
switch is
ON for 1
second
or more.
The
power
source
voltage
of the
blind
spot
monitor
sensor
LH is 10
V or
more.
Turn the
ignition switch
to ON, turn the
blind spot
monitor system
on using the
blind spot
monitor main
switch (ON/OFF
switch), wait at
least 1 second.
Displays
messages on
the multi-
information
display.
DTC is
stored until
it is cleared
using the
Techstream.
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *