Tacoma

Toyota Tacoma 2015-2018 CAN Workshop Manual

DTC DETECTION
ITEM
DTC DETECTION
CONDITION
DTC DETECTION
PRE-CONDITION
DTC CHECK
PROCEDURE
WARNING
INDICATION
IN METER
DTC
STORAGE
METHOD
second
or more.
The
power
source
voltage
of the
blind
spot
monitor
sensor
LH is 10
V or
more.
U0142
Lost
Communication
with Body
Control Module
"B"
The blind spot
monitor sensor
LH does not
receive data from
the main body
ECU (multiplex
network body
ECU) for 10.6
seconds or more.
All conditions are
met:
Blind
spot
monitor
main
switch
on.
The
ignition
switch is
ON for 1
second
or more.
The
power
source
voltage
of the
blind
spot
monitor
sensor
LH is 10
V or
more.
Turn the
ignition switch
to ON, turn the
blind spot
monitor system
on using the
blind spot
monitor main
switch (ON/OFF
switch), wait at
least 11.6
seconds.
Displays
messages on
the multi-
information
display.
DTC is
stored until
it is cleared
using the
Techstream.
U0232*
Lost
Communication
with Blind Spot
Monitor Slave
Module
The blind spot
monitor sensor
LH does not
receive data from
the blind spot
monitor sensor
All conditions are
met:
Blind
spot
monitor
main
Turn the
ignition switch
to ON, turn the
blind spot
monitor system
on using the
Displays
messages on
the multi-
information
display.
DTC is
stored until
it is cleared
using the
Techstream.
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *