Tacoma

Toyota Tacoma 2015-2018 CAN Workshop Manual

more.
(m) Network Gateway ECU / Techstream Display "Gateway"
HINT:
This ECU uses the CAN communication system for DTC communication.
"Gateway" stores DTCs when a communication error is detected in the Sub bus 2.
Network Gateway ECU / Techstream Display "Gateway"
DTC DETECTION ITEM DTC DETECTION
CONDITION
DTC DETECTION
PRE-CONDITION
DTC CHECK
PROCEDURE
WARNING
INDICATION
IN METER
DTC
STORAGE
METHOD
U0233
Lost
Communication
with Blind Spot
Monitor Master
Module
The network
gateway ECU does
not receive data
from the blind spot
monitor sensor LH.
The ignition
switch is ON for
10 seconds or
more.
Turn the
ignition switch
to ON and
wait at least
20 seconds.
-
DTC is stored
until it is
cleared using
the
Techstream.
U1002
Lost
Communication
with Gateway
Module (Network
Gateway ECU)
The network
gateway ECU detects
communication
errors between itself
and the blind spot
monitor sensor LH,
and clearance
warning ECU
assembly.
The ignition
switch is ON for
10 seconds or
more.
Turn the
ignition switch
to ON and
wait at least
20 seconds.
-
DTC is stored
until it is
cleared using
the
Techstream.
U1110
Lost
Communication
with Clearance
Warning ECU
The network
gateway ECU does
not receive data
from the clearance
warning ECU
assembly.
The ignition
switch is ON for
10 seconds or
more.
Turn the
ignition switch
to ON and
wait at least
20 seconds.
-
DTC is stored
until it is
cleared using
the
Techstream.
(n) Clearance Warning ECU Assembly / Techstream Display "Intuitive P/A"
HINT:
T
his ECU uses the CAN communication system for DTC communication.
Clearance Warning ECU Assembly / Techstream Display "Intuitive P/A"
DTC DETECTION
ITEM
DTC DETECTION
CONDITION
DTC DETECTION
PRE-CONDITION
DTC CHECK
PROCEDURE
WARNING
INDICATION
IN METER
DTC
STORAGE
METHOD
U0100
Lost
Communication
with ECM / PCM
"A"
The clearance
warning ECU
assembly does
not receive data
from the ECM for
5 seconds or
more.
Both conditions are
met:
The ignition
switch is ON
for 5
seconds or
more.
Turn the
ignition switch
to ON and
wait at least
10 seconds.
-
DTC is stored
until it is
cleared using
the
Techstream.
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *