Tacoma

Toyota Tacoma 2015-2018 CAN Workshop Manual

more.
U0140
Lost
Communication
with Body
Control Module
The radio and
display receiver
assembly does not
receive data from
the main body
ECU (multiplex
network body
ECU) for 3
seconds or more.
Both conditions are
met:
The ignition
switch is
ON for 1
second or
more.
The power
source
voltage of
the radio
and display
receiver
assembly is
9.5 V or
more.
Turn the
ignition
switch to ON
and wait at
least 4
seconds.
-
DTC is stored
until it is
cleared using
the
Techstream.
U0155
Meter ECU
Communication
The radio and
display receiver
assembly does not
receive data from
the combination
meter assembly
for 30 seconds or
more.
Both conditions are
met:
The ignition
switch is
ON for 1
second or
more.
The power
source
voltage of
the radio
and display
receiver
assembly is
9.5 V or
more.
Turn the
ignition
switch to ON
and wait at
least 31
seconds.
-
DTC is stored
until it is
cleared using
the
Techstream.
U1110
Clearance Sonar
ECU
Communication
The radio and
display receiver
assembly does not
receive data from
the clearance
warning ECU
assembly for 10
seconds or more.
Both conditions are
met:
The ignition
switch is
ON for 1
second or
more.
The power
source
voltage of
the radio
and display
receiver
assembly is
9.5 V or
Turn the
ignition
switch to ON
and wait at
least 11
seconds.
-
DTC is stored
until it is
cleared using
the
Techstream.
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *