Tacoma

Toyota Tacoma 2015-2018 CAN Workshop Manual

DTC DETECTION
ITEM
DTC DETECTION
CONDITION
DTC DETECTION
PRE-CONDITION
DTC CHECK
PROCEDURE
WARNING
INDICATION
IN METER
DTC
STORAGE
METHOD
the
navigation
receiver
assembly is
9.5 V or
more.
U0155
Meter ECU
Communication
The navigation
receiver assembly
does not receive
data from the
combination
meter assembly
for 30 seconds or
more.
Both conditions are
met:
The ignition
switch is ON
for 1 second
or more.
The power
source
voltage of
the
navigation
receiver
assembly is
9.5 V or
more.
Turn the
ignition
switch to ON
and wait at
least 31
seconds.
-
DTC is stored
until it is
cleared using
the
Techstream.
U1110
Clearance Sonar
ECU
Communication
The navigation
receiver assembly
does not receive
data from the
clearance warning
ECU assembly for
10 seconds or
more.
Both conditions are
met:
The ignition
switch is ON
for 1 second
or more.
The power
source
voltage of
the
navigation
receiver
assembly is
9.5 V or
more.
Turn the
ignition
switch to ON
and wait at
least 11
seconds.
-
DTC is stored
until it is
cleared using
the
Techstream.
(l) Radio and Display Receiver Assembly / Techstream Display "Navigation System"
HINT:
T
his ECU uses the CAN communication system for DTC communication.
Radio and Display Receiver Assembly / Techstream Display "Navigation System"
DTC DETECTION
ITEM
DTC DETECTION
CONDITION
DTC DETECTION
PRE-CONDITION
DTC CHECK
PROCEDURE
WARNING
INDICATION
DTC
STORAGE
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *