Tacoma

Toyota Tacoma 2015-2018 CAN Workshop Manual

A
PROCEDURE
1. SYSTEM CHECK
(a) Check the vehicle specifications.
Result
RESULT PROCEED TO
for Automatic Air Conditioning System A
for Manual Air Conditioning System B
B
GO TO STEP 4
2.
CHECK FOR OPEN IN CAN BUS LINES (AIR CONDITIONING AMPLIFIER ASSEMBLY
BRANCH LINE)
(a) Disconnect the cable from the negative (-) battery terminal.
(b) Disconnect the air conditioning amplifier assembly connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
TESTER CONNECTION CONDITION SPECIFIED CONDITION
A36-8 (CANH) - A36-9 (CANL) Cable disconnected from negative (-) battery terminal 54 to 69 Ω
Text in Illustration
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *