Tacoma

Toyota Tacoma 2015-2018 CAN Workshop Manual

DTC DETECTION
ITEM
DTC
DETECTION
CONDITION
DTC DETECTION
PRE-CONDITION
DTC CHECK
PROCEDURE
WARNING
INDICATION IN
METER
DTC
STORAGE
METHOD
(skid
control
ECU)
(+BS
terminal
voltage)
is
between
9.6 and
16.5 V.
(d) Brake Actuator Assembly (Skid Control ECU) / Techstream Display "ABS/VSC/TRAC"
HINT:
T
his ECU uses the CAN communication system for DTC communication.
Brake Actuator Assembly (Skid Control ECU) / Techstream Display "ABS/VSC/TRAC"
DTC DETECTION
ITEM
DTC
DETECTION
CONDITION
DTC DETECTION
PRE-CONDITION
DTC CHECK
PROCEDURE
WARNING
INDICATION IN
METER
DTC
STORAGE
METHOD
U0073
Control Module
Communication
Bus OFF
Bus off is
judged for 0.1
seconds or
more.
Both conditions are
met:
The
ignition
switch is
ON for 1
second or
more.
The
power
source
voltage of
the brake
actuator
assembly
(skid
control
ECU)
(+BS
terminal
voltage)
is
between
9.6 and
16.5 V.
Turn the
ignition
switch to ON
and check
that the
initial light
check
illumination
turns off, and
then wait at
least 3
seconds.
ABS
warning
light
illuminates.
Slip
indicator
light
illuminates.
Brake
warning
light
illuminates.
DTC is
stored until
it is cleared
using the
Techstream.
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *