Tacoma

Toyota Tacoma 2015-2018 CAN Workshop Manual

2. CHECK FOR SHORT IN CAN BUS LINES (ECM - NO. 1 CAN JUNCTION CONNECTOR)
(a) for 2GR-FKS
(1) Reconnect the C9 combination meter assembly connector.
(2) Disconnect the ECM connector.
(3) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
TESTER CONNECTION CONDITION SPECIFIED
CONDITION
E13-27 (CANH) - E13-35
(CANL)
Cable disconnected from negative (-) battery
terminal
108 to 132 Ω
Text in Illustration
*a
Front view of wire harness connector
(to ECM)
HINT:
I
f the resistance becomes normal (between 108 to 132 Ω) when the connector is disconnected, there may
be a short in the ECM.
(b) for 2TR-FE
(1) Reconnect the C9 combination meter assembly connector.
(2) Disconnect the ECM connector.
(3) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
TESTER CONNECTION CONDITION SPECIFIED
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *