Tacoma

Toyota Tacoma 2015-2018 CAN Workshop Manual

*e to Main Body ECU (Multiplex Network Body ECU) *f
to Certification ECU (Smart Key ECU
Assembly) (w/ Smart Key System)
*g to Combination Meter Assembly *h
to Spiral Cable with Sensor
Sub-assembly
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
TESTER
CONNECTION
CONDITION SPECIFIED
CONDITION
CONNECTED TO
J3-1 (CANH) -
D4-4 (CG)
Cable disconnected from
negative (-) battery terminal
200 Ω or higher No. 1 CAN junction connector
J3-11 (CANL) -
D4-4 (CG)
J3-2 (CANH) -
D4-4 (CG)
Cable disconnected from
negative (-) battery terminal
200 Ω or higher
Door control and tire pressure
monitoring system receiver assembly*1
J3-12 (CANL) -
D4-4 (CG)
J3-3 (CANH) -
D4-4 (CG)
Cable disconnected from
negative (-) battery terminal
200 Ω or higher DLC3
J3-13 (CANL) -
D4-4 (CG)
J3-4 (CANH) -
D4-4 (CG)
Cable disconnected from
negative (-) battery terminal
200 Ω or higher
Main body ECU (multiplex network
body ECU)
J3-14 (CANL) -
D4-4 (CG)
J3-5 (CANH) -
D4-4 (CG)
Cable disconnected from
negative (-) battery terminal
200 Ω or higher
Certification ECU (smart key ECU
assembly)*2
J3-15 (CANL) -
D4-4 (CG)
J3-6 (CANH) -
D4-4 (CG)
Cable disconnected from
negative (-) battery terminal
200 Ω or higher Combination meter assembly
J3-16 (CANL) -
D4-4 (CG)
J3-7 (CANH) -
D4-4 (CG)
Cable disconnected from
negative (-) battery terminal
200 Ω or higher Spiral cable with sensor sub-assembly
J3-17 (CANL) -
D4-4 (CG)
*1: w/ Tire Pressure Warning System and Tire Inflation Pressure Display Function
*2: w/ Smart Key System
Result
RESULT PROCEED TO
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *