Tacoma

Toyota Tacoma 2015-2018 CAN Workshop Manual

Text in Illustration
*1 DLC3 - -
*a
Front view of wire harness connector
(to No. 4 CAN Junction Connector)
*b to No. 3 CAN Junction Connector
*c to No. 1 CAN Junction Terminal *d to Blind Spot Monitor Sensor LH (w/ Blind Spot Monitor System)
Standard Resistance:
TESTER CONNECTION CONDITION SPECIFIED
CONDITION
CONNECTED TO
J20-1 (CANH) - D4-4
(CG)
Cable disconnected from negative (-)
battery terminal
200 Ω or higher
No. 3 CAN junction
connector
J20-3 (CANL) - D4-4
(CG)
Cable disconnected from negative (-)
battery terminal
200 Ω or higher
J20-2 (CANH) - D4-4
(CG)
Cable disconnected from negative (-)
battery terminal
200 Ω or higher
No. 1 CAN junction
terminal
J20-4 (CANL) - D4-4
(CG)
Cable disconnected from negative (-)
battery terminal
200 Ω or higher
J20-6 (CANH) - D4-4
(CG)
Cable disconnected from negative (-)
battery terminal
200 Ω or higher
Blind Spot Monitor
Sensor LH*1
J20-7 (CANL) - D4-4
(CG)
Cable disconnected from negative (-)
battery terminal
200 Ω or higher
J20-1 (CANH) - D4-16
(BAT)
Cable disconnected from negative (-)
battery terminal
6 kΩ or higher
No. 3 CAN junction
connector
J20-3 (CANL) - D4-16
(BAT)
Cable disconnected from negative (-)
battery terminal
6 kΩ or higher
J20-2 (CANH) - D4-16
(BAT)
Cable disconnected from negative (-)
battery terminal
6 kΩ or higher
No. 1 CAN junction
terminal
J20-4 (CANL) - D4-16
(BAT)
Cable disconnected from negative (-)
battery terminal
6 kΩ or higher
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *