Tacoma

Toyota Tacoma 2015-2018 CAN Workshop Manual

A
TESTER
CONNECTION
CONDITION SPECIFIED
CONDITION
RESULT
N32-12 (CA2L) -
N32-2 (BATT)
Cable disconnected
from negative (-)
battery terminal
6 kΩ or
higher
Below 6 kΩ:
CANL +B
short
Text in Illustration
*a
Component with harness connector
(Network Gateway ECU)
RESULT PROCEED TO
OK A
Open circuit in CAN main bus line B
Short circuit between bus lines C
Ground short
+B short
D
B
GO TO STEP 3
C
GO TO STEP 7
D
GO TO STEP 13
2. RECONFIRM DTC OUTPUT
(a) Reconnect the cable to the negative (-) battery terminal.
(b) Connect the Techstream to the DLC3.
(c) Turn the ignition switch to ON.
(d) Turn the Techstream on.
(e) Clear the DTCs.
(f) Turn the ignition switch off.
(g) Turn the ignition switch to ON and recheck for DTCs.
RESULT PROCEED TO
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *