Tacoma

Toyota Tacoma 2015-2018 CAN Workshop Manual

*a
Front view of wire harness connector
(to Certification ECU (Smart Key ECU Assembly))
- -
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
TERMINAL NO.
(SYMBOL)
WIRING
COLOR
TERMINAL DESCRIPTION CONDITION SPECIFIED
CONDITION
C29-7 (CANH) -
C29-8 (CANL)
P - W
HIGH-level CAN bus line -
LOW-level CAN bus line
Cable disconnected from
negative (-) battery terminal
54 to 69 Ω
C29-7 (CANH) -
C29-11 (E)
P - W-B
HIGH-level CAN bus line -
Ground
Cable disconnected from
negative (-) battery terminal
200 Ω or higher
C29-8 (CANL) -
C29-11 (E)
W - W-B
LOW-level CAN bus line -
Ground
Cable disconnected from
negative (-) battery terminal
200 Ω or higher
C29-7 (CANH) -
C29-10 (+B)
P - P
HIGH-level CAN bus line -
Battery positive (+)
Cable disconnected from
negative (-) battery terminal
6 kΩ or higher
C29-8 (CANL) -
C29-10 (+B)
W - P
LOW-level CAN bus line -
Battery positive (+)
Cable disconnected from
negative (-) battery terminal
6 kΩ or higher
16. NAVIGATION RECEIVER ASSEMBLY (for Navigation Receiver Type)
(a) Disconnect the cable from the negative (-) battery terminal.
(b) Disconnect the navigation receiver assembly connector.
Text in Illustration
*a
Front view of wire harness connector
(to Navigation Receiver Assembly)
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
TERMINAL NO.
(SYMBOL)
WIRING
COLOR
TERMINAL DESCRIPTION CONDITION SPECIFIED
CONDITION
N25-9 (CANH) -
V - W
HIGH-level CAN bus line - Cable disconnected from
54 to 69 Ω
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *