Tacoma

Toyota Tacoma 2015-2018 CAN Workshop Manual

(b) Disconnect the steering sensor connector.
Text in Illustration
*a
Front view of wire harness connector
(to Spiral Cable with Sensor Sub-assembly)
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
TERMINAL NO.
(SYMBOL)
WIRING
COLOR
TERMINAL DESCRIPTION CONDITION SPECIFIED
CONDITION
S32-3 (CANH) -
S32-2 (CANL)
Y - W
HIGH-level CAN bus line -
LOW-level CAN bus line
Cable disconnected from
negative (-) battery terminal
54 to 69 Ω
S32-3 (CANH) -
S32-1 (ESS)
Y - W-B
HIGH-level CAN bus line -
Ground
Cable disconnected from
negative (-) battery terminal
200 Ω or higher
S32-2 (CANL) -
S32-1 (ESS)
W - W-B
LOW-level CAN bus line -
Ground
Cable disconnected from
negative (-) battery terminal
200 Ω or higher
S32-3 (CANH) -
S32-5 (BAT)
Y - W
HIGH-level CAN bus line -
Battery positive (+)
Cable disconnected from
negative (-) battery terminal
6 kΩ or higher
S32-2 (CANL) -
S32-5 (BAT)
W - W
LOW-level CAN bus line -
Battery positive (+)
Cable disconnected from
negative (-) battery terminal
6 kΩ or higher
14. AIRBAG SENSOR ASSEMBLY
(a) Disconnect the cable from the negative (-) battery terminal.
(b) Disconnect the airbag sensor assembly connector.
Text in Illustration
*1 DLC3 - -
*a
Front view of wire harness connector
(to Airbag Sensor Assembly)
- -
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *