Tacoma

Toyota Tacoma 2015-2018 CAN Workshop Manual

*e
to Navigation Receiver Assembly (for Navigation
Receiver Type) or Radio and Display Receiver
Assembly (for Radio and Display Type)
(for V Bus)
*f
to ECM
(for V Bus)
*g
to Network Gateway ECU (w/ Blind Spot
Monitor System or Intuitive Parking Assist
System)
(for V Bus)
*h
to Airbag Sensor Assembly
(for V Bus)
*i
to 4 Wheel Drive Control ECU (for 4WD)
(for V Bus)
- -
(2) Check the connection diagram of the components which are connected to the No. 1 CAN junction
connector.
TERMINAL NO.
(SYMBOL)
WIRING
COLOR
CONNECTED TO
J16-1 (CANH) P
Brake booster assembly (skid control ECU)*1 or brake actuator assembly
(skid control ECU)*2
(for V Bus)
J16-11 (CANL) W
J16-2 (CANH) SB
No. 2 CAN junction connector
(for V Bus)
J16-12 (CANL) W
J16-3 (CANH) L
Air conditioning amplifier assembly
(for V Bus)
J16-13 (CANL) W
J16-4 (CANH) V
Navigation receiver assembly*3 or radio and display receiver assembly*4
(for V Bus)
J16-14 (CANL) W
J16-5 (CANH) B
ECM
(for V Bus)
J16-15 (CANL) W
J16-6 (CANH) G
Network gateway ECU*5
(for V Bus)
J16-16 (CANL) W
J16-7 (CANH) R
Airbag sensor assembly
(for V Bus)
J16-17 (CANL) W
J16-8 (CANH) BE
4 wheel drive control ECU*6
(for V Bus)
J16-18 (CANL) W
*1: for Hydraulic Brake Booster
*2: for Vacuum Brake Booster
*3: for Navigation Receiver Type
*4: for Radio and Display Type
*5: w/ Blind Spot Monitor System or Intuitive Parking Assist System
*6: for 4WD
2. NO. 2 CAN JUNCTION CONNECTOR
(a) Check the No. 2 CAN junction connector.
(1) Connection diagram
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *