Tacoma

Toyota Tacoma 2015-2018 CAN Workshop Manual

SYMPTOM SUSPECTED AREA SEE
PAGE
"Combination Meter" is not displayed on the
Techstream.
Combination Meter ECU Communication
Stop Mode
"Certification (Smart)" is not displayed on the
Techstream.*2
Certification ECU Communication Stop Mode
"Airbag" is not displayed on the Techstream.
Center Airbag Sensor Communication Stop
Mode
"Display and Navigation (AVN1)" is not displayed on the
Techstream.*3
Radio Receiver Assembly Communication
Stop Mode
"Display and Navigation (AVN1)" is not displayed on the
Techstream.*4
Navigation Receiver Assembly
Communication Stop Mode
"Four Wheel Drive Control" is not displayed on the
Techstream.*5
4WD Control ECU Communication Stop
Mode
"Tire Pressure2" is not displayed on the Techstream.*6
Tire Pressure Monitor ECU Communication
Stop Mode
*1: w/ Blind Spot Monitor System or Intuitive Parking Assist System
*2: w/ Smart Key System
*3: Radio and Display Receiver Assembly
*4: Navigation Receiver Assembly
*5: for 4WD
*6: w/ Tire Pressure Warning System and Tire Inflation Pressure Display Function
DTC Combination Table
SYMPTOM SUSPECTED AREA SEE
PAGE
Although CAN communication (V bus) is
currently normal, ECUs connected to the
V bus store CAN communication DTCs.
The probable part for which communication is interrupted
can be determined using DTC Combination Table and
comparing the DTCs output from ECUs connected to the CAN
communication system
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *