Tacoma

Toyota Tacoma 2015-2018 CAN Workshop Manual

OK
ASSEMBLY
4.
CHECK FOR OPEN IN CAN BUS LINES (AIR CONDITIONING AMPLIFIER ASSEMBLY
BRANCH LINE)
(a) Disconnect the cable from the negative (-) battery terminal.
(b) Disconnect the air conditioning amplifier assembly connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
TESTER CONNECTION CONDITION SPECIFIED
CONDITION
A14-10 (CANH) - A14-11
(CANL)
Cable disconnected from negative (-) battery
terminal
54 to 69 Ω
Text in Illustration
*a
Front view of wire harness connector
(to Air Conditioning Amplifier Assembly)
NG
REPAIR OR REPLACE CAN BRANCH LINE OR
CONNECTOR (AIR CONDITIONING AMPLIFIER
ASSEMBLY)
5. CHECK HARNESS AND CONNECTOR (POWER SOURCE CIRCUIT)
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *