Tacoma

Toyota Tacoma 2015-2018 Brake Workshop Manual

A
OK
A
RESULT PROCEED TO
DTC is output B
B
REPAIR CIRCUITS INDICATED BY OUTPUT DTCS
3.
C
HECK HARNESS AND CONNECTOR (CSW TERMINAL)
NG
GO TO STEP 6
4. CHECK FOR DIFFERENTIAL SYSTEM
(a) Reconnect the S1 skid control ECU (master cylinder solenoid) connector.
(b) Connect the Techstream to the DLC3.
(c) Turn the ignition switch to ON.
(d) Turn the Techstream on.
(e) Enter the following menus: Powertrain / Four Wheel Drive / Trouble Codes.
(f) Check for DTCs.
Result
RESULT PROCEED TO
DTCs are not output A
DTCs are output B
B
GO TO DIFFERENTIAL SYSTEM (DIAGNOSTIC
TROUBLE CODE CHART)
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *