Last Modified: 11-13-2015 6.6 J Doc ID: RM00000451Z00PX
Model Year Start: 2016 Model: Tacoma Prod Date Range: [08/2015 - ]
Title: BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM (for Hydraulic Brake Booster): AUTO LSD
Indicator Light does not Come ON; 2016 MY Tacoma [08/2015 - ]
AUTO LSD Indicator Light does not Come ON
The AUTO LSD does not operate even if the VSC OFF switch is pressed under the following conditions:
The brake system is faulty.
The temperature inside the hydraulic brake booster increases and the AUTO LSD operation is
The rear differential is locked.
Refer to AUTO LSD Indicator Light Remains ON .
When replacing the skid control ECU (master cylinder solenoid), perform calibration .
Inspect the fuses for circuits related to this system before performing the following inspection procedure.
CHECK CAN COMMUNICATION SYSTEM
GO TO CAN COMMUNICATION SYSTEM (HOW TO
PROCEED WITH TROUBLESHOOTING)
2. CHECK DTC
(a) Check for DTCs .
RESULT PROCEED TO
DTC is not output A