Tacoma

Toyota Tacoma 2015-2018 Brake Workshop Manual

OK
OK
3. READ VALUE USING TECHSTREAM (AUTO LSD INDICATOR LIGHT)
(a) Turn the ignition switch off.
(b) Connect the Techstream to the DLC3.
(c) Turn the ignition switch to ON.
(d) Turn the Techstream on.
(e) Enter the following menus: Chassis / ABS/VSC/TRAC / Data List.
(f) According to the display on the Techstream, read the Data List.
ABS/VSC/TRAC
TESTER DISPLAY TEST PART CONTROL RANGE DIAGNOSTIC NOTE
Auto LSD Indicator Light Auto LSD indicator light/ ON or OFF Indicator light OFF/ON
ON: Indicator light on
OFF: Indicator light off
(g) Check the Techstream display condition of the brake warning light.
Result
RESULT PROCEED TO
Display of the Data List remains OFF A
Display of the Data List remains ON B
B
REPLACE MASTER CYLINDER SOLENOID
A
GO TO METER / GAUGE SYSTEM (HOW TO PROCEED
WITH TROUBLESHOOTING)
4.
INSPECT VSC OFF SWITCH
NG
REPLACE VSC OFF SWITCH
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *