Tacoma

Toyota Tacoma 2015-2018 Brake Workshop Manual

TESTER DISPLAY MEASUREMENT ITEM CONTROL RANGE DIAGNOSTIC NOTE
ABS Warning Light ABS warning light Warning light OFF/ON
Observe the combination meter.
[Vehicle condition]
Vehicle stopped
(f) When performing the ABS Warning Light Active Test, check ABS Warning Light in the Data List.
ABS/VSC/TRAC
TESTER DISPLAY MEASUREMENT ITEM/RANGE NORMAL CONDITION DIAGNOSTIC NOTE
ABS Warning Light ABS warning light/ ON or OFF OFF -
Result
RESULT PROCEED TO
ABS warning light in the Data List does not change using the Active Test A
ABS warning light in the Data List turns ON/OFF using the Active Test B
B
GO TO STEP 3
A
REPLACE MASTER CYLINDER SOLENOID
3. INSPECT COMBINATION METER ASSEMBLY
(a) Turn the ignition switch off.
(b) Perform Active Test of the combination meter assembly using the Techstream.
(c) Check the combination meter assembly.
OK:
The ABS warning light turns on or off in accordance with the Techstream.
NG
GO TO METER / GAUGE SYSTEM
OK
REPLACE MASTER CYLINDER SOLENOID
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *