Tacoma

Toyota Tacoma 2015-2018 Brake Workshop Manual

A
(f) Check for DTCs.
Result
RESULT PROCEED TO
DTCs are not output A
DTCs are output B
B
GO TO DIFFERENTIAL SYSTEM (DIAGNOSTIC
TROUBLE CODE CHART)
8. READ VALUE USING TECHSTREAM (ABS WARNING LIGHT)
(a) Reconnect the S1 skid control ECU (master cylinder solenoid) connector.
(b) Connect the Techstream to the DLC3.
(c) Turn the ignition switch to ON.
(d) Turn the Techstream on.
(e) Enter the following menus: Chassis / ABS/VSC/TRAC / Data List.
(f) According to the display on the Techstream, read the Data List.
ABS/VSC/TRAC
TESTER DISPLAY MEASUREMENT ITEM/RANGE NORMAL CONDITION DIAGNOSTIC NOTE
ABS Warning Light ABS warning light/ ON or OFF OFF -
(g) Check the Techstream display condition of the ABS warning light.
Result
RESULT PROCEED TO
Display of the Data List remains OFF A
Display of the Data List remains ON B
B
REPLACE MASTER CYLINDER SOLENOID
A
GO TO METER / GAUGE SYSTEM
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *