Tacoma

Toyota Tacoma 2015-2018 Brake Workshop Manual

A
OK
2. CHECK DTC
(a) Check for DTCs .
Result
RESULT PROCEED TO
DTC is not output A
DTC is output B
B
REPAIR CIRCUITS INDICATED BY OUTPUT DTCS
3. INSPECT BATTERY
(a) Inspect the battery voltage .
Standard voltage:
11 to 14 V
NG
CHECK CHARGING SYSTEM
4. CHECK CAN COMMUNICATION SYSTEM
(a) Turn the ignition switch off.
(b) Connect the Techstream to the DLC3.
(c) Turn the ignition switch to ON.
(d) Turn the Techstream on.
(e) Select CAN Bus Check from the System Selection Menu screen and follow the prompts on the screen
to inspect the CAN bus .
OK:
CAN Bus Check indicates no malfunctions in CAN communication.
NG
GO TO CAN COMMUNICATION SYSTEM (HOW TO
PROCEED WITH TROUBLESHOOTING)
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *