Tacoma

Toyota Tacoma 2015-2018 Brake Workshop Manual

Last Modified: 11-13-2015 6.6 A Doc ID: RM000005VQQ000X
Model Year Start: 2016 Model: Tacoma Prod Date Range: [08/2015 - ]
Title: BRAKE: VACUUM PUMP: INSTALLATION; 2016 MY Tacoma [08/2015 - ]
INSTALLATION
1. INSTALL VACUUM PUMP ASSEMBLY
(a) Apply engine oil to the 2 O-rings on the vacuum pump assembly.
(b) Apply engine oil to the inner surface of the installation hole.
(c) Install the vacuum pump assembly so that the oil pipe engages with the hole of the camshaft and the
coupling teeth with the grooves on the camshaft tip.
NOTICE:
E
nsure that the vacuum pump assembly is installed securely.
Be careful not to pinch the O-ring.
(d) Install the vacuum pump assembly to the engine assembly with
the 3 bolts in the order shown in the illustration.
Torque:
21 N·m {214 kgf·cm, 15ft·lbf}
NOTICE:
After installation, check that there are no gaps between the
matching surfaces and that the vacuum pump assembly is no
installed at an angle.
2. INSTALL NO. 2 WATER BY-PASS PIPE
(a) Install the No. 2 water by-pass pipe with the 2 bolts.
Torque:
10 N·m {102 kgf·cm, 7ft·lbf}
3. CONNECT UNION TO CHECK VALVE HOSE
(a) Connect the union to check valve hose and slide the clip to secure it.
4. INSTALL V-BANK COVER SUB-ASSEMBLY
5. INSPECT VACUUM PUMP OPERATION
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *